Products / Wall Solutions / Plaster & Concrete Finish Coat
PLASTER & CONCRETE FINISH COAT
Mortar Indonesia Plaster & Concrete Finish Coat is a finishing coat for interior and exterior plaster and concrete surfaces. A homogeneous mixture of cement, sand, and selected materials provides optimal application and quality.
Product Strengths
- Applicable on interior and exterior concrete and plaster walls.
- Longer drying for easier application.
- Only 7-day waiting period for painting without wall putty.
- Smoother, less powdery result for better paint adhesion.
- Comes in light gray for brighter paint color.
- No hairline cracking from shrinkage.
Specifications
Form: Powder
Color: Gray
Water requirement: 13.0–14.0 liters/40-kg sack
Spreadability: ± 20 m²/40-kg sack/1.5-mm thickness
Application thickness: 1.50–3.00 mm
PACKAGING
40-kg paper packaging
STORAGE
- Store in a confined space at room temperature and specific humidity, do not expose to direct water or heat.
- Stacking more than 8 (eight) high per pallet is not recommended.
- A maximum stacking of 2-pallet high is recommended.
EXPIRATION
Products can be stored for 10 months in accordance with storage recommendations. The expiration date can be found on the packaging.
Instructions
Area
Concrete substrate surface
Method
1. Preparation
- Clean the surface of the plaster or concrete to be coated from any dirt, such as dust and oil, that may compromise the adhesion of the admixture.
- Check the substrate; wet the surface of the plaster or concrete with clean water if it is too dry.
2. Mixing
- Prepare 13.0-14.0 liters of water for each Mortar Indonesia Plaster & Concrete Finish Coat (40 kg).
- Pour Mortar Indonesia Plaster & Concrete Finish Coat into the previously prepared mixing bucket.
- Mix the admixture well. It is recommended to use a mixer.
3. Application
- Apply the homogeneous Mortar Indonesia Plaster & Concrete Finish Coat evenly to the cleaned plaster or concrete surface.
- Scrub the plaster or concrete surface with a coating trowel for more optimal results. It is not recommended to scrub in a circular pattern.
- Apply a second coat if needed.
- No need to sand, use cement paper, or other similar techniques.
Applications
