Product Strengths
- No chipping necessary on wall or floor surfaces.
- Strong adhesion that prevents the ceramic from falling off during vertical application.
- Expansion and shrinkage resistant.
- Longer drying during application.
- Protection from popping.
Specifications
Form: Powder
Color: Gray
Water requirement: 5.0-6.0 liters/25-kg sack
Spreadability: ± 5 m²/25-kg sack/3-mm thickness
Adjustment time: 5.0–10.0 minutes
Open time: 20.0 minutes
Application thickness: 2.0–10.0 mm
PACKAGING
25-kg paper packaging
STORAGE
- Store in a confined space at room temperature and specific humidity, do not expose to direct water or heat.
- Stacking more than 8 (eight) high per pallet is not recommended.
- A maximum stacking of 2-pallet high is recommended.
EXPIRATION
Products can be stored for 10 months in accordance with storage recommendations. The expiration date can be found on the packaging.
Instructions
Area:
- Red brick and AAC surface
- Plaster, screed, and concrete surface
Method
1. Preparation
- Clean the surface from any dirt, such as dust and oil, that may compromise the adhesion of the admixture.
- Make sure the substrate is even; uneven substrate may result in more product use.
- Use ceramic installation markers for optimal results.
2. Mixing
- Prepare 5.0-6.0 liters of water for each Mortar Indonesia Tile Adhesive (25 kg).
- Pour Mortar Indonesia Tile Adhesive into the previously prepared mixing bucket.
- Mix the admixture well. It is recommended to use a mixer.
3. Application
- Apply Mortar Indonesia Tile Adhesive with plastering trowel with teeth, then install the ceramic carefully for higher precision.
- A thickness of 2.0 – 10.0 mm is recommended for optimal application, but make adjustments based on the size, ceramic absorption rate, and substrate evenness.
Applications
